Renogy 200 Watts 12 Volts Polycrystalline Solar Panel Starter Kit with 30A Negative Ground PWM Charge Controller. Renogy 200W Polycrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence.
This solar kit comes with the tools necessary for a new system: two Renogy 100W 12V Polycrystalline Solar Panels, a 30A PWM Wanderer Charge Controller, a 20ft 10AWG MC4 Adaptor Kit, an 8ft 10AWG Tray Cable, a pair of branch connectors, and two sets of Z-brackets. Start your solar adventure with a Renogy Starter Kit.
We offer residential and commercial solar kits that include all of the necessary system components that you'll need for your setup, from charge controllers to inverters, railings to cables, and more. These kits are suitable for both on-grid and off-grid applications, allowing you the flexibility to pick the system which best fits your needs.
Thinking about purchasing our products in bulk? We offer discounts for bulk orders.
Please send us a message for more information and start saving now. The kit now includes an 8ft 10AWG Tray Cable to connect your charge controller and battery. The charge controller has been upgraded to Renogy's new 30A PWM Negative-Ground Charge Controller - the Renogy Wanderer.EL tested solar modules; no hot-spot heating guaranteed. Ideal output: 1000Wh per day; can fully charge a 50Ah battery from 50% in 1.5 hours (depending on the availability of sunlight). With the Renogy Wanderer 30A PWM Charge Controller, you can expand your system up to a maximum of 400W. The Renogy 100W Polycrystalline Expansion Kit. Is the perfect solution for future expansion.
Renogy 100W 12V Polycrystalline Solar Panel. Output Cables: 4.0 mm2 (0.006 in2), 800mm (31.5 in). Maximum System Voltage: 600V DC (UL). Optimum Operating Voltage (Vmp): 17.8V. Open-Circuit Voltage (Voc): 22.4V.Optimum Operating Current (Imp): 5.62A. Short-Circuit Current (Isc): 5.92A. Dimensions: 39.7 x 26.7 x 1.4 In. The Renogy Wanderer 30A Negative PWM Charge Controller. PV Input Voltage: 25 VDC. Low Voltage Disconnect: 11.1V. Low Voltage Reconnect: 12.6V. Under Voltage Recover: 12.2V. Boost Voltage: Sealed: 14.4V; Flooded: 14.6V; Gel: 14.2V. Equalization Voltage: Sealed:14.6V; Flooded: 14.8V; Gel: NO. Working Temperature: -20°F - 113°F. Storage Temperature: -31°F - 176°F. Max Gauge Size:Up to 4AWG.
Dimensions: 6.45 x 4.31 x 1.76 inches. Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers. Temperature: -40 F 194 F. Normal Cross Sectional Area of the Conductor (mm2): 6.0. Diameter of Wires in Conductor (mm): 3.02±0.08.Wall Thickness of Insulation (mm): 0.85. Wall Thickness of Sheath (mm): 1.08. Number of Wires in Conductor: 84. Renogy Solar Panel Mounting Z Brackets (Set of 4). Four Z Shape Solar Panel Brackets. Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair).
Renogy Solar Panel MC4 Branch Connectors (Pair). Withstanding voltage: 1000V DC(TUV), 600V(UL).Contact Material: Copper, Silver Plated. Flame Class: UL94-V0 or UL94-5VA. Renogy was founded on the strong belief that solar power should be available to everyone, anywhere on the planet. Thus we strive to offer clean energy for every application and will customize according to different needs. We use top quality solar cells and superior accessories to produce high performance solar modules that maximize the energy yield of the solar system per unit area, thereby reducing the system cost per watt for you. Glass: 3.2mm tempered glass, excellent mechanical loading performance, resists 5400PA snow loads and 2400PA wind load.
EVA Film: main component is 30%-33% of EVA, which assures a high transmission, strong adhesion and long term performance. Cell: excellent performance in low light environment and high conversion efficiency guaranteed. Frame: strong corrosion resistant aluminum frames. Backsheet: both sides of backsheet are coated with fluoro resin to prevent aging. This unique structure allows our backsheet to provide perfect adhesion with EVA and junction box.QUALITY ASSURANCE Industry-leading Testing Approved (Under UL1703, IEC 61215, IEC 61730 Standards). Thermal/Freezing and High Humidity Cycling Test. Mechanical, Wind and Twist Loading Test.
Please note that we won't be able to process any order with PO Box address for any size of solar panel. Anything outside of this policy requires special authorization.
Other Items You Might Be Interested In. The item "Renogy 200W 12V Solar Panel Starter Kit 30A Controller Off Grid Battery Charger" is in sale since Tuesday, November 13, 2018. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "renogyinternational" and is located in Brampton, Ontario.
This item can be shipped to Canada.