Before you paying the order, you should see the technical parameter carefully and confirm the inverter / automatic voltage regulator / stabilizer / solar controller / transformer / uninterrupted power supplier (UPS) can meet your requirement and solve your problem. Where do you need the inverter used for?Whats the type of the load and the total load capacity? Whats the input DC voltage? Whats the output AC voltage do you need? Whats the kind of your battery? Lithium or others If you used the Lithium battery, please share the battery parameters with us to matching the inverter, such as the Rated voltage, Over voltage & Under voltage protecting parameter. Whats the type of yo.
If you have the solar power, do you need the related MPPT? If yes, please share the total capacity of solar panels. If you need the related MPPT, do you need the external single MPPT or the build-in MPPT?
The build-in MPPT is built into the Inverter as an integrated Inverter. High output capacity up to 15KW. Ultra low THD, typically 7% under full linear load (battery low). Battery temperature sensing for increased charging precision.Powerful charge rate up to 120Amp , selectable from 0%100%. Auto gen start function for off grid system with generator as backup power.
MPPT solar charger controller available. HP Series Pure Sine Wave Inverter & MPPT & Charger HP-PV Series Pure Sine Wave Inverter is a combination of an inverter, charger, solar power and Auto-transfer switch into one complete system. It is packed with unique features and it is one of the most advanced inverter/chargers in the market today. Feature of HP Series Inverter & MPPT & Charger. V Smart Remote Control (RMT).
V Battery Temperature Sensor (BTS). V Automatic Generator Starting (AGS). V Support Solar Panel with MPPT Function. V Designed to Operate under Harsh Environment. V DC Start & Automatic Self-Diagnostic Function.
V Compatible with Both Linear & Non-Linear Load. V Easy to Install & Easy to Operate & Easy to Solve. V Low DC Voltage Supports Home & Office Appliances.
V Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%. V High Efficiency Design & Power Saving Mode to Conserve Energy. V Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration. V 13 Vdc Battery Recover Point, Dedicated for Renewable Energy Systems. V 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries.
V 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger. V 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity. V 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator. Slide to the left for full table.
Pure Sine wave/Same as input(Bypass Mode). 50Hz ± 0.3Hz/60Hz ± 0.3Hz. 10.0Vdc/ 10.5Vdc for 12Vdc Mode. 2 for 24Vdc, 4 for 48Vdc. 10.5Vdc/ 11.0Vdc for 12Vdc Mode.16.0Vdc for 12Vdc Mode. 15.5Vdc for 12Vdc Mode.
Battery Initial Voltage for Start. 10-15.7Vdc for 12Vdc Mode. 15.7Vdc for 12Vdc Mode. Variances in Charging Voltage & S.D Voltage Based on the Battery Temperature. Sine wave (Grid or Generator).
150VAC For 120Vac LV Mode; 300VAC For 230Vac HV Mode. 50Hz or 60Hz (Auto detect). 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz. 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz. 30Amp for UL & TUV.
12Vdc / 24Vdc / 48Vdc. 15-45Vdc / 30-70Vdc / 60-100Vdc. 14.5Vdc for 12Vdc Mode. 13.5Vdc for 12Vdc Mode. 14.0Vdc for 12Vdc Mode.
14.8Vdc for 12Vdc Mode. 13.6Vdc for 12Vdc Mode. 10.8Vdc for 12Vdc Mode. 12.3Vdc for 12Vdc Mode. 13.2mV/°C for 12Vdc Mode.
0 40°C(Full load) 40 60°C(Derating). Inverter Weight (Solar Chg) KG. Status LEDs / Status LEDs+LCD. Note: Specifications subject to change without notice.
The item "DC24V/48V-10KW HP off-grid pure sine wave power inverter battery charger solar" is in sale since Friday, April 10, 2020. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters".
The seller is "jackyzhang910" and is located in Shenzhen. This item can be shipped worldwide.