Sunpower 100watt Flexible Solar Panel Systems with CTEK D250SE Battery to Battery Charger Kit. For the best leisure battery charging solution for your vehicle supplied with the CTEK D250SE 12v 20amp battery to battery charger + Sunpower 100w flexible solar panel and fitting kit.
Kit supplied with a full wiring kit for the Ctek charger please sellect from the options above and you will be supplied with the items below. You will be supplied with everything you need. 1 x CTEK D250SE 20amp Charger.1-8 mtrs 10mm² 70amp Red Battery Cable. 2mtrs 10mm² 70amp Black Battery Cable. 5mtrs 1.5mm² 15amp Red optional ignition cable. 1 x Pair 8mm Post Type Battery Terminals.
2 x Midi Fuse Holders + 4 x 30amp Midi Fuses. 1 x Pack Terminals + Heat Shrink. 10 x Cable tie bases. 15 x cable ties 150mm.
15 X 8x3/4 screws + 3mm HSS drill bit. 1-8mtrs protective conduit to suit 10mm² cable. 1 x Sunpower SPE-E-Flex-100 100watt Solar Panen.1 x 5mtr Solar lead with MC4 connectors. 1 x White roof gland. With award winning Swedish technology, the dual input D250SE which has now replaced the D250SA with added.
Connection to lithium batteries can draw its power from smart alternators and other DC sources, making it the ideal. Charger for vehicles that dont have access to a mains power supply. Its dual input capability means it can draw.Power from solar and wind sources, in parallel to the alternator. The D250SE is a fully automatic, 5 step charger that supplies up to 20A of power to charge, condition and.
Maintain any 12V lead acid service battery from 40-300Ah, including Wet, MF, Gel, AGM. EFB and Ca/Ca & lifepo4 Lithium. The D250SE uses patented technology so its safe for you and your vehicles electronics. The D250SE automatically delivers the optimum charge so your batteries are fully charged in the shortest possible time.
Can select normal or 14.7V AGM charge voltages. It also has a temperature sensor to compensate for hot or cold conditions and. Avoid the risk of your battery overheating or overcharging. DIRECT CONNECTION FOR SOLAR POWER.
The D250SE has an input for connecting solar panels without the need for a regulator. It also features a Maximum Power. Point Tracker (MPPT) to get the maximum power out of your solar panels.
Vehicle manufacturers are now introducing smart ECU (Engine Control Unit) controlled alternators to increase fuel efficiency. Smart alternators deliver a variable out- put and are shut off when theyre not needed. The D250SE will still operate even if the smart alternator is shut off and maintain a stable output of up to 20A to fully. Charge your battery in the shortest time.
5 step charging from smart and conventional alternators and DC sources, such as solar and wind. Automatic battery separator works without the need for diodes or VSR relays.Selectable AGM mode for AGM batteries. Parallel input from both alternator and solar panel. Solar panel regulator with Maximum Power Point Tracking (MPPT).
Starter battery maintenance charging when your service battery is fully charged. Made with SunPowers highest power Gen II back. Contact cells, SunPowers flexible panels deliver the highest power output and the highest charging capacity in their product class. SunPowers panels are constructed with top-grade, light-weight polymer materials, allowing for easy transport, installation and panel flexing up to 30 degrees.The SunPower Maxeon® Solar Cell is the only cell built on a solid copper foundation. SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due of the combination of high power and cell ruggedness. Easy and Low Cost Installation.
The panel can be installed with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quickconnect cables. An easy-to-follow installation guide is provided with each panel. Supplied with 5mtrs solar cable , cable entry gland and Sikaflex adhesive. Nominal Power (Pnom) 100 W.Rated Voltage (Vmpp) 17.1 V. Rated Current (Impp) 5.9 A.
Open-circuit voltage (Voc) 21.4 V. Short-curcuit current (Isc) 6.3 A. Power Temp Coeffiecient 0.35%/° C.
Voltage Temp Coefficient 58.9 mV/° C. Current Temp Coefficient 2.6 mA/° C. System Voltage 1000 V DC IEC, 600 V DC UL. 25% and 23% efficiency SunPower IBC cells.
Junction Box TE 1-21-2152049-1 with by-pass diode. Cables 4 mm2,12 AWG, 450 mm long. Panel Dimensions 1165 x 556 x 20 mm with Jbox, 2 mm w/o Jbox. The item "CTEK D250SE Battery to Battery Charger + Sunpower 100watt Flexible Solar Panel" is in sale since Sunday, March 10, 2019.This item is in the category "Wholesale & Job Lots\Automotive". The seller is "simplysplitcharge" and is located in millom. This item can be shipped worldwide.