Solar Battery Charger

150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL

150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL

150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL

150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL. Photovoltaic solar Kit with energy storage to be used in the evening. Very popular in boat, RV, cabin, mountain huts, impoverished areas, areas not served by grid access providers etc. Solar kit composed of 160 Watt monocrystalline photovoltaic panel, DC gauge, MC4 connectors, PWM 10A charger, AGM 100Ah battery and 4 15W fluorescent lamps for all applications such as boats, camper van, cabin, huts and 12 Volt systems. The kit contains: - 1 Photovoltaic Monocrystalline 160W Module - 480 x 670 x 35 mm (our code 30050175); - 1 Solar Charge Controller PWM 10A 12V - 13.3x7.1 cm (our code 30550701); - 1 AGM 12V 100Ah battery, - 34x22x16.3 cm (our code 20050930); - 1 MC4 Cabur male connector (our code 30750303); - 1 MC4 Cabur female connector (our code 30750304); - 1 Digital DC Amps Volts Watt Meter + Energy Meter (our code 34900000); - 4 Fluorescent lamps 15W 12V E27 6400K Cold Light (our code 27550320).

Photovoltaic Monocrystalline module 160W 12V. Designed for rural lighting solutions, data collection and special applications. Thanks to its versatility, the panel is very popular and used both in developing countries as well as the European market. This panel was designed to work under the most difficult climatic and working conditions. The design of the anodized aluminium frame makes the panel safe, simple and quick to install in many applications.

Every single cell and panel produced undergoes a series of tests and quality controls during every phase of production. The interconnections between panels are easy, practical and optimized for every configuration and voltage.

Features: - Type: SS160-36M; - Module efficiency: 16%; - Cell efficiency: 17.5%; - Peak power: 160W; - Vm voltage at maximum p. : 18.5V; - Im (maximum current): 8.65A; - Voc (open circuit voltage): 22.5V; - Isc (short circuit current): 9.14A; - Power tolerance: +-3%; - Dimensions: 1480 x 670 x 35 mm; - Weight: approx 12 Kg; - Maximum system voltage: 1000VDC. PWM Charge Controller for PV systems 12 Volt. Suitable to charge GEL, AGM or acid batteries via traditional 36 cell photovoltaic panels. Charges batteries in boats, RVs, cabins and shelters, alarm systems.

With battery status LED indicator. Features: - Voltage configurations: 12V; - Rated charging current: 10A; - Output: 1; - Working temperature: -35/+55°C; - Protection: IP30; - Type: Stand Alone, Boat/Camper; - Dimensions: 13,3x7,1 cm; - Weight: 0,119 Kg; - LCD display: NO. Sealed batteries with AGM technology are designed for both cyclic and buffer use.

The unique construction technique makes these batteries totally hermetic preventing potential leakage of gas or acid in any position of operation. These batteries are maintenance free and can operate at temperatures from - 20 to + 45%. This special C10 battery has the characteristic of enduring discharges faster compared to normal batteries. The most common use of these batteries is. Setting up of gasoline outboards. Nominal capacity: 100 Ah (C10). Cycle use: 14.4 - 15.0 V (25°C). Standby use: 13.5 - 13.8 V (25°C). Dimensions (LxHxW): 34 x 22 x 16.3 cm. MC4 Cabur male and female connectors. Designed specifically for the creation of rapid and reliable connections in photovoltaic applications with the most common inverter and junction box. Contacts are made with tinned copper and casing in PPO. LINE 4, with metal contacts D. Technical data: - PIN dimension: D. 4mm; - Maximum voltage: 1000 VDC; - Maximum current: 30A at 70°C - 25A at 85°C; - Contact resistance: <5m Ohm Materials: - Contact material: Cu; - Plating: Tin; - Insulation: PPO.

Environmental conditions: - Protection grade: IP67 (IEC 60529); - Temperature range: -40°C +90°C; - Flammability level: UL94-VO. Digital DC Amps Volts Watt Meter + Energy Meter.

This meter is great to use as an inexpensive way to spot check renewable energy system for power production. Measures 8 Parameters + Energy Meter. Great tool with many uses! Specifications: - Input voltage: From 4.8V to 60V; - Input voltage (with auxiliary power): From 0V to 60V; - Current: From 0A to 150A (resolution 0.01A); - Max continuous current = 65A; - Power: From 0W toa 6554W (resolution 0.1W); - Energy: From 0Wh to 6554Wh (resolution 0.01Wh); - Display: Backlit display 2.4 LCD; - Dimensions: 85 x 42 x 25 mm; - Weight: 82 g.

Fluorescent lamp 12V 15W E27 6400K Cold Light. Compact 15W fluorescent cold light with Edison E27 base. Features: - Power supply: 15W; - Voltage: 12V; - DC (Direct Current); - Colour temperature: 6400K; - Dimension: 170 x 60 mm; - Weight: 80 gr; - Plug type: E27. The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. The declaration form and ID document must be sent to. Or fax +39 0431 687013. The item "150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL" is in sale since Friday, November 10, 2017.

This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels". The seller is "nautiline_italy" and is located in Carlino (UD). This item can be shipped worldwide.

  • Brand: ShopEnergia
  • MPN: 30200164CFL

150W (160W) Mono Solar Kit 12V 100Ah Battery 10A Charger Connectors DC Gauge CFL