Camper photovoltaic kit composed of 100W polycrystalline photovoltaic panel, PWM 10A solar charge controller, AGM 100Ah Battery and. 4 angle brackets in white ABS. For all applications such as boats, camper vans, cabin, lodges and 12V off grid systems.
The kit contains: - 1. Photovoltaic panel, dimensions: 1001x667x32 mm (our code 30050170); - 1 Solar charge controller PWM 10A 12V, dimensions: 13.3x7.1 cm (our code 30550701); - 1 AGM 12V 100Ah battery, dimensions (LxHxW): 34x22x16.3 cm (our code 20050930); - 1 Fixing support in white ABS (our code 31550200). Photovoltaic solar polycrystalline panel of 100W, EurSolar.
Designed for rural lighting solutions, data survey, telecommunications and special applications. The panel is very popular and used both in developing countries as well as the European market.This panel was designed to work under the most difficult climatic and working conditions. The design of the anodized aluminum frame makes the panel safe, simple and quick to install in many applications. Every single cell and panel produced undergoes a series of tests and quality controls during every phase of production. The interconnections between panels are easy, practical and optimized for every configuration and voltage. Features: - Model: EUR100P; - Peak power: 100W; - Vm voltage at maximum p. : 17.5V; - Im (maximum current): 5.71A; - Voc (open circuit voltage): 21.5V; - Isc (short circuit current): 6.34A; - Power tolerance: +-5%; - Dimensions: 1001x667x32 mm; - Weight: 9 kg; - Maximum system voltage: 600VDC. PWM 10A Charge Controller for PV systems 12 Volt. Suitable to charge GEL, AGM or acid batteries via traditional 36 cell photovoltaic panels. Charges batteries in boats, RVs, cabins and lodges, warning systems. With battery status LED indicator. Features: - Voltage configurations: 12V; - Rated charging current: 10A; - Output: 1; - Working temperature: -35/+55°C; - Protection degree: IP30; - Type: Stand Alone, Boat/Camper; - Dimensions: 13.3x7.1 cm; - Weight: 0.119 kg; - LCD display: NO.
Sealed batteries with AGM technology, are designed for both cyclic and buffer use. The unique construction technique makes these batteries totally hermetic preventing potential leakage of gas or acid in any position of operation. These batteries are maintenance free and can operate at temperatures from - 20 to + 45%. This special C10 battery has the characteristic of withstanding discharges faster compared to normal batteries.The most common use of these batteries is: - As backup batteries. Setting up of gasoline outboards. Features : - Nominal voltage: 12V; - Nominal capacity: 100 Ah (C10); - Constant voltage charge; - Voltage regulation; - Cycle use: 14.4 - 15.0 V (25°C); - Standby use: 13.5 - 13.8 V (25°C); - Dimensions (LxHxW): 34 x 22 x 16.3 cm; - Weight: about 30 kg. Fixing brackets in white ABS. 4 angular supports (brackets) in white plastic material for fixing a photovoltaic panel on the roof of a camper van. They can be used with any PV module with aluminum frame.
The substrate must be fixed to the roof securely, for example by using Sikaflex 252 glue (respecting the cycle of preparation and bonding provided). However, it is always recommended to reinforce the mounting with screws. The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY.The declaration form and ID document must be sent to. Or fax +39 0431 687013. Inserzione creata con Open2b Commerce Ready. The item "100W 12V Poly Camper Solar Kit with PWM 10A Charger AGM 100Ah Battery Angle Brac" is in sale since Thursday, October 12, 2017. This item is in the category "Home & Garden\Home Improvement\Electrical & Solar\Alternative & Solar Energy\Solar Panels". The seller is "nautiline_italy" and is located in Carlino (UD). This item can be shipped worldwide.